Support advanced wound care with UltraPRESS™ T3, a versatile foam designed for applications where reliable performance and consistent structure matter. Its reticulated construction and larger pore size make it well suited for negative pressure wound therapy, while providing a versatile option for wound care and other medical applications.
UltraPRESS™ T3
Experience the Foamtec Way
About UltraPRESS™ T3
Designed for negative pressure wound therapy, UltraPRESS™ T3 is a reticulated polyether foam with a larger pore size than UltraPRESS™ T. Its open-cell structure provides a versatile option for wound care and medical device applications where a larger pore structure is beneficial.
Common Applications
- Negative Pressure Wound Therapy
- Advanced Wound Care
- Medical devices
- Type of foam: Polyester Reticulated Polyurethane
- Density: 1.50 - 1.90 lb/ft3
- Pore Size: 20 - 40 PPI
- Hydrophobic Properties
- Cytotoxicity Grade: 0
FAQ
What is UltraPRESS™ T3 used for?
UltraPRESS™ T3 is a reticulated polyether foam designed primarily for negative pressure wound therapy. It can also be considered for advanced wound care, medical devices, and other applications where its larger pore structure is beneficial. These are common applications, but UltraPRESS™ T3 is not limited to the uses listed here.
What makes UltraPRESS™ T3 different?
UltraPRESS™ T3 is similar to UltraPRESS™ T but features a larger pore size. Its reticulated, open-cell structure provides an alternative for applications where a larger pore structure is preferred.
Is UltraPRESS™ T3 suitable for negative pressure wound therapy?
Yes. Negative pressure wound therapy is one of the primary applications for UltraPRESS™ T3. Its reticulated polyether construction and larger pore size make it well suited for this type of advanced wound care application.
What is the difference between UltraPRESS™ T and UltraPRESS™ T3?
Both UltraPRESS™ T and UltraPRESS™ T3 are reticulated polyether foams designed for negative pressure wound therapy. The primary difference is pore size: UltraPRESS™ T3 has larger pores than UltraPRESS™ T, giving manufacturers another option when a larger pore structure is desired.
Experience the Foamtec Way
